Low loader semi-trailer Faymonville 3-Achs-Tele-Semi mit hydraulischen Rampen

Gooseneck:

Gooseneck in SNT design to optimize the length of the loading floor, length approx. 3.700 mm.

Gooseneck with chamfered corners at the front (45°) and chamfer at the rear approx. 1.000 mm x 10°.

For trucks: 4x2, 6x2 and 6x4

Loading floor:

Telescopic loading floor, length approx.. 9.200 mm, with rear chamfer approx. 500 mm x 10°.

Pneumatic locking.

Ramps:

1 pair of hydraulic two-piece steel ramps with hardwood floor (approx. 53 mm), length approx. 2.855 + 1.485 x 890 mm.

Hydraulically double folding ramps, ramps individually hydraulically movable.

Axles and suspension:

SAF axles and suspension, last axle as self steering axle.

The electro-magnetic reverse lock is activated via reverse gear or manually.

Air suspension with lifting and lowering valve.

Tyres: 235/75 R 17,5, twin tyres.

Braking system:

WABCO-braking system (EBS-E) according to EU-regulations.

Lighting system:

24-volt lighting system "ASPÖCK-NORDIK full LED", according to EU regulations.

Metallisation:

Standard HRM-Metallisation.

Painting:

6-K final treatment.

Rims: silver

Chassis: MB 7350 nova grey

Steel construction:

Steel construction made of high-strength fine-grained steels.

Steel quality:

S355J2 + N / S355MC (yield strength 355 MPa)

S690QL / S700MC (yield strength 690 MPa).

Additional equipment:

Steel bulkhead, pluggable, height: approx. 400 mm.

2x 7-pin & 1x 15-pin sockets at the front.

1 spare wheel holder before the bulkhead.

Parking positions for warning plates on the gooseneck.

External rods of the gooseneck with threads for screwable lashing rings. First thread ca. 200 mm from the front, then ca. every 400 mm. 2 pairs of screwable lashing rings (LC 5.000 daN).

2 threads for screwable lashing rings at the chamfer of the gooseneck. 1 pair of screwable lashing rings (LC 10.000 daN).

Hardwood floor (40 mm) on the gooseneck.

3 drop-sides (height approx.. 400 mm) on the gooseneck.

2” king pin.

4 wheel chokes with holder.

Landing legs with two gears. JOST Modul B.

Hardwood floor (50 mm) on the loading floor.

1 middle bridge (width 300 mm).

10 pairs of lashing rings (10.000 daN) on the loading floor. There of 9 pairs in the outer frame.

Side extensions (zinced).

Deposit for wooden planks under the loading floor.

Operation valves of the ramps on the right side.

1 pair of mechanical rear support.

Dirt trap at the rear.

1 holder for beacon light at the rear.

Electro-Hydraulic aggregate (3 kW) for hydraulic operations.

NATO-socket at the front.

4x 7-pin sockets for warning lights.

7-pin socket at the rear.

EU-reflector at the rear.

7 pairs of stanchion pockets in the outer frame of the loading floor.

WADER-Container-lockings in the loading floor to transport 1x 20ft or 1x 40ft container.

WABCO Smartboard system with information of the axle load.

4 warning plates (423 x 423 mm), extendable.

Contour marking in white on both sides.

Contour marking in red at the rear.

Hydraulic ramps removable, quick connect system